Fiber Optic Surface Plasmon Resonance Sensor Research Articles

FO-SPR Model for Full-Spectrum Signal Analysis of Back-reflecting FO-SPR Sensors to Monitor MOF Deposition.

In this study, we explore the full-spectrum capabilities of fiber-optic surface plasmon resonance (FO-SPR) for analyzing heterogeneous samples with increased comprehensiveness. Our approach involves refining a literature-derived FO-SPR model to more precisely reflect experimental data obtained using a back-reflecting sensor configuration. Key enhancements in our model include adjustments to the thickness and permittivity of the gold SPR-active layer on the FO-SPR sensor as well as improvements to the angular distribution of light within the system. We apply this optimized model to the investigation of the deposition process of a metal-organic framework (MOF), specifically ZIF-8, using FO-SPR. By closely examining the temporal variations in the FO-SPR signal during MOF layer formation, we simultaneously determine the evolving thickness and refractive index (RI) of the MOF layer, offering a dual-parameter analysis. Our results demonstrate that a full-spectrum analysis of the FO-SPR signal can extract critical information from samples exhibiting radial heterogeneity. This advancement significantly enhances the quantitative assessment of various phenomena that alter the refractive index in the sensor's domain, such as adsorption and binding processes. This work thus represents a significant step forward in the field of FO-SPR sensor technology, promising broad applications in areas requiring the precise detection and analysis of complex samples.

High sensitive optical fiber SPR sensor for label-free detection of Staphylococcus aureus

Optical fiber bacterial sensors have attracted attention in many fields due to their unique advantages. However, it is still difficult to promote its practicality which is mainly subject to their low sensitivity, inferior stability, and reliability. This work reported here an optical fiber surface plasmon resonance (SPR) biosensor enhanced by gold nanoparticles (AuNPs)/Au film coupling for label-free detection the Staphylococcus aureus (S. aureus), while both the gold substrates were successfully biofunctionalized with goat anti-human immunoglobulin G (IgG) as the probe to capture and detect the bacteria. In the experiment, the refractive index（RI） sensitivity of the Multimode-Singlemode-Multimode optical fiber (MSMOF) coated with Au film was improved by 19 % after the AuNPs were homogeneously decorated on the Au film surface. To detect S. aureus by the sensor, the SPR wavelength variation in the transmission spectrum was recorded, and its limit of detection (LOD) was demonstrated experimentally to be about 50 CFU/mL and was obtained theoretically to be 1.18 CFU/mL during its concentration range of 50–108 CFU/mL. Also, it shows great linearity in the range of 102-108 CFU/mL and the sensor exhibits excellent specificity and stability. This kind of SPR-enhanced optical fiber biosensor is fully promising for its applications in biomedicine, food safety, pharmaceuticals, etc.

Optical fiber surface plasmon resonance sensor using electroless-plated gold film for thrombin detection.

This paper describes the simple and label-free detection of thrombin using optical fiber surface plasmon resonance (SPR) sensors based on gold films prepared by the cost-effective method of electroless plating. The plating conditions for simultaneously obtaining gold film on cylindrical core and end surfaces of anoptical fiber suitable for measurement were optimized. The fabricated sensor exhibited a linear refractive index sensitivity of 2150 nm/RIU and 7.136 (a.u.)/RIU in the refractive index of 1.3329-1.3605 interrogated by resonance wavelength and amplitude methods respectively and a single wavelength monitoring method was proposed to investigate the sensing performance of this sensor. Polyadenine diblock and thiolated thrombin aptamers were immobilized on gold nanoparticles and gold films respectively to implement asandwich optical fiber assay for thrombin. The developed optical fiber SPR sensors were successfully used in the determination of thrombin down to 0.56 nM over a wide range from 2 to 100 nM and showed good selectivity for thrombin, which indicated their potential clinical applications for biomedical samples.

MMF-SMF-MMF optic surface plasmon resonance sensor based on hexagonal plate-like [formula omitted] structure

The manuscript introduces a fiber-optic MSM SPR sensor employing a hexagonal plate-like structure of Co(OH)2/TiO2/Au for surface plasmon resonance (SPR) sensing. This article aims to improve it through optimization of material composition and structure. The MSM structure SPR sensors were fabricated on the surface of single-mode fiber optic using chemical precipitation and physical vapor deposition, where Co(OH)2 and TiO2 served as sensitive materials. The experimental results demonstrate that the proposed sensor exhibited significantly higher sensitivity and broader application potential than the gold film control group and the gold film/TiO2 control group. Specifically, the gold film control group had a sensitivity of 1778.44 nm/RIU, while the sensitivity of the TiO2/Au control group was 2230.9 nm/RIU. In contrast, the Co(OH)2/TiO2/Au structure SPR sensor had a sensitivity of 3106.5 nm/RIU, which is far superior to the two control groups. Moreover, the results of repeated measurements indicated that the resonant wavelength error was only within 2 nm. These findings suggest that the Co(OH)2/TiO2/Au structure SPR sensor has promising stability and repeatability, making it suitable for applications in various fields, including chemical sensing and biological sensing.

Silver-coated hollow fiber surface plasmon resonance sensor for glucose detection with enhanced limit of detection.

A fiber-optic surface plasmon resonance (SPR) biosensor based on a silver-coated hollow fiber (HF) structure for glucose detection is presented. The sensor surface was immobilized with 4-mercaptophenylboronic acid (PMBA) acting as a glucose recognition monolayer. Then, gold nanoparticles (AuNPs) modified with 2-aminoethanethiol (2-AET) and PMBA were introduced onto the sensor surface after glucose was captured to enhance the wavelength shift of the SPR phenomenon excited by the light transmitted in the wall of the HF sensor. Instead of the conventional one-step sensitization pretreatment commonly used in the deposition process of silver films for fiber-optic SPR sensors, a sensitization-activation two-step activation method was adopted in the fabrication of the proposed sensor. Experiments for glucose detection were performed on the fabricated sensors in the concentration range of 1 nM-1 mM. Results showed that the sensor fabricated by the two-step activation method has a much larger shift of resonance wavelength than the sensor fabricated using the one-step sensitization method. The resonance wavelength shift was found to be linear to the logarithm of the concentration in the range of 1 nM-1 mM. The sensor achieved a limit of detection (LOD) of as low as 1 nM, which is at least an order of magnitude lower than that of other fiber-optic sensors for glucose detection reported previously. The presented HF glucose sensor has the potential for biosensing applications and provides a large reference value in the study of optical fiber SPR sensors for biosensing.

A lipase-conjugated carbon nanotube fiber-optic SPR sensor for sensitive and specific detection of tributyrin.

As a low-density lipoprotein, tributyrin plays an essential role in food safety and human health. In this study, a novel lipase-conjugated carbon nanotube (CNT) surface plasmon resonance (SPR) fiber-optic sensor is used to specifically detect tributyrin for the first time. In this work, CNTs can be used as an amplifying material to significantly increase the sensitivity of SPR sensors due to their high refractive index and large surface area. CNTs can also be used as an enzyme carrier to provide abundant carboxyl groups for the specific binding of lipases. Covering the surface of the sensor with CNTs can not only enhance the performance of the sensor, but also provide sufficient detection sites for subsequent biomass detection, reduce the functionalization steps, and simplify the sensor preparation process. The experimental results demonstrate that the refractive index sensitivity of the traditional multimode fiber (MMF)-single mode fiber (SMF)-MMF transmissive optical fiber sensor is 1705 nm RIU-1. After covering the sensor with CNTs, the sensitivity is 2077 nm RIU-1, and the sensitivity has been improved very well. In addition, there are abundant functional groups on CNTs, which can provide abundant binding sites. Conjugating lipase on carbon nanotubes helps to achieve linear detection in the range of 0.5 mM to 4 mM tributyrin, with a sensitivity of 4.45 nm mM-1 and a detection limit of 0.34 mM, which is below the 2.26 mM detection standard and meets food safety monitoring requirements. Compared with other sensors, the optical fiber biosensor proposed in this study expands the concentration detection range of tributyrin. Furthermore, the sensor also has good stability, anti-interference performance and specificity. Therefore, the sensor proposed in this paper has good application prospects in the fields of food safety and biomedicine.

Advanced Integration of Glutathione-Functionalized Optical Fiber SPR Sensor for Ultra-Sensitive Detection of Lead Ions.

It is crucial to detect Pb2+ accurately and rapidly. This work proposes an ultra-sensitive optical fiber surface plasmon resonance (SPR) sensor functionalized with glutathione (GSH) for label-free detection of the ultra-low Pb2+ concentration, in which the refractive index (RI) sensitivity of the multimode-singlemode-multimode (MSM) hetero-core fiber is largely enhanced by the gold nanoparticles (AuNPs)/Au film coupling SPR effect. The GSH is modified on the fiber as the sensing probe to capture and identify Pb2+ specifically. Its working principle is that the Pb2+ chemically reacts with deprotonated carboxyl groups in GSH through ligand bonding, resulting in the formation of stable and specific chelates, inducing the variation of the local RI on the sensor surface, which in turn leads to the SPR wavelength shift in the transmission spectrum. Attributing to the AuNPs, both the Au substrates can be fully functionalized with the GSH molecules as the probes, which largely increases the number of active sites for Pb2+ trapping. Combined with the SPR effect, the sensor achieves a sensitivity of 2.32 × 1011 nm/M and a limit of detection (LOD) of 0.43 pM. It also demonstrates exceptional specificity, stability, and reproducibility, making it suitable for various applications in water pollution, biomedicine, and food safety.

High-sensitivity optical fiber SPR sensor with cascaded biconical fiber and hetero-core structure for simultaneous measurement of seawater salinity and temperature

A novel dual-channel optical fiber surface plasmon resonance (SPR) sensor, which achieves high-sensitivity simultaneous measurement of seawater salinity and temperature, was designed and verified. The hetero-core structure based on no-core fiber (NCF) with 40 nm thick Au film and polydimethylsiloxane (PDMS) overlaying was utilized to excite the SPR effect and serve as the temperature sensing channel. In order to effectively separate from the temperature SPR dip, a silver/gold bimetallic film was deposited on the surface of the biconical fiber with a grinding angle of 14° to construct the salinity channel cascaded with the temperature channel, where the metal thickness was determined as Ag/Au: 30 nm/10 nm. The simulation and experimental results showed that the bimetallic film used in this article can significantly improve the figure of merit (FOM) of the sensor compared with the optical fiber SPR sensor deposited with a single kind of metal film. In addition, further experimental results on salinity and temperature indicated that the proposed sensor had a salinity sensitivity of 0.73 nm/‰ and a temperature sensitivity of −2.43 nm/℃, and demonstrated the advantages of ease of manufacturing, acceptable repeatability, and good stability. Therefore, the proposed dual-channel optical fiber SPR sensor has high research value and application prospects in the field of ocean measurement.

MUA/NPAM/ZnO-coated Fiber-Optic surface plasmon resonance sensor for trace Chromium-Ion detection

A transmission fiber-optic surface plasmon resonance (SPR) sensor based on three-core optical fiber (TCF) coated with mercaptoundecanoic acid (MUA)/ nonionic polyacrylamide (NPAM)/zinc oxide (ZnO) composite film for the detection of chromium ions (Cr3+) in water was proposed and fabricated. Multi-mode fiber (MMF) was spliced with both ends of TCF to form the MMF1-TCF-MMF2 sensing structure. The silver (Ag) film was deposited on the surface of TCF cladding, and then a uniform MUA/NPAM/ZnO composite film was coated on the outer surface of the Ag film to adsorb Cr3+, resulting in the wavelength shift of the SPR resonance peak. After adsorption of Cr3+, the refractive index of the sensing film changed and the resonance wavelength shifted about 62 nm. The detection limit of the sensor is about 0.029 μΜ (1.5 ppb), and the minimum detection concentration of Cr3+ is about 0.2 µM (10 ppb), which is far lower than that of the World Health Organization standard (50 ppb). The sensor shows excellent selectivity, high sensitivity and good stability for the trace Cr3+, and has potential application for monitoring Cr3+ in water.

Fiber-Optic Nanosensors for Chemical Detection

Recently, rapid progress has been achieved in the field of nanomaterial preparation and investigation. Many nanomaterials have been employed in optical chemical sensors and biosensors. This review is focused on fiber-optic nanosensors for chemical sensing based on silica and plastic optical fibers. Four types of fiber-optic chemical nanosensors, namely fiber nanotip sensors, fiber nanoarray sensors, fiber-optic surface plasmon resonance sensors, and fiber-optic nanomaterial-based sensors, are discussed in the paper. The preparation, materials, and sensing characteristics of the selected fiber-optic nanosensors are employed to show the performance of such nanosensors for chemical sensing. Examples of fiber-optic nanobiosensors are also included in the paper to document the broad sensing performance of fiber-optic nanosensors. The employment of fiber-nanotips and nanoarrays for surface-enhanced Raman scattering and nanosensors employing both electrical and optical principles and “Lab-on-fiber” sensors are also included in the paper. The paper deals with fiber-optic nanosensors based on quantum dots, nanotubes, nanorods, and nanosheets of graphene materials, MoS2, and MXenes.

Refractive index SPR sensor with high sensitivity and wide detection range using tapered silica fiber and photopolymer coating.

This paper introduces a surface plasmon resonance (SPR) sensor using tapered silica fiber and photopolymer coating for enhanced refractive index (RI) detection. Tapering the silica fiber to a diameter of 10 µm ensures the evanescent wave leaks into a 1.8-µm thick photopolymer film, which increases the average waveguide RI and broadens the RI detection range accordingly. A 50-nm thick single-side gold film is coated on the photopolymer film, exciting SPR and causing less light transmission loss than a double-side gold film. The method avoids the complex microfabrication processes of conventional polymer optical fiber SPR sensors, while the waveguide RI can be controlled by altering the curing time of the photopolymer during fabrication. The sensor has an overall sensitivity of 3686.25 nm/RIU, enabling RI detection of 1.333 - 1.493. Moreover, the sensor has an ultrahigh sensitivity of 6422.9 nm/RIU in the RI range of 1.423 - 1.493. The temperature response is about 1.43 nm/°C at 20 - 50 °C, which has little impact on RI detection. Finally, we demonstrate that the sensor can grade the severity of hepatic steatosis by measuring the RIs of cytoplasm/triglyceride emulsions with superior sensing performance.

A L-glutamine binding protein modified MNM structured optical fiber biosensor based on surface plasmon resonance sensing for detection of L-glutamine metabolism in vitro embryo culture

A surface plasmon resonance (SPR) optical fiber sensor with multimode-coreless-multimode (MNM) structure was developed, which modified by L-glutamine-binding protein (QBP) for detection of L-glutamine (Gln). The QBP was immobilized on the surface of gold films by chemical cross-linking and exhibited a binding affinity for L-glutamine. The conformation of QBP can be changed from the “open” to the “closed”, which led to a red-shift of the SPR peak when QBP bounded to L-glutamine. There was a good linear correlation between is a dependence of the SPR peak on and the concentration of L-glutamine concentration in the range 10–100 μM, with a sensitivity of 10.797nm/log10[Gln] for L-glutamine in the in vitro embryo culture (IVC) medium environment, and the limit of detection (LOD) is 1.187 μM. This QBP-modified MNM structure optical fiber SPR sensor provides a new idea for the developmental potential assessment of embryos in the process of in vitro embryo culture.

Polarization-independent tilted fiber Bragg grating surface plasmon resonance sensor based on spectrum optimization.

We experimentally demonstrated polarization multiplexing schemes in a tilted fiber grating (TFBG) to achieve polarization-independent fiber-optic surface plasmon resonance (SPR) sensors. The first used two orthogonal polarized lights separated by a polarization beam splitter (PBS) that are p-polarized in polarization-maintaining fiber (PMF) and precisely aligned with the tilted grating plane, so as to achieve the transmission of p-polarized light in two opposite directions of the Au-coated TFBG to excite SPR. Alternatively, polarization multiplexing was also achieved by exploring two polarization components to achieve the SPR effect through a Faraday rotator mirror (FRM). The SPR reflection spectra are polarization-independent of the light source and any perturbations to fibers, which are explained by the superposition of p- and s-polarized transmission spectra in equal proportions. The spectrum optimization is presented to reduce the proportion of the s-polarization component. A polarization-independent TFBG-based SPR refractive index (RI) sensor with a wavelength sensitivity of 555.14 nm/RIU and an amplitude sensitivity of 1724.92 dB/RIU for small changes is obtained, exhibiting unique advantages of minimizing the polarization alterations by mechanical perturbations.

An axisymmetric metal and metal-oxide grating-structured self-reference fiber optic SPR sensor

An optical-fiber-based surface plasmon resonance (SPR) sensing probe consisting of axisymmetrical grating is proposed and studied theoretically for the detection of the refractive index (RI). The sensing probe is formed by depositing a plasmonic metal layer on a bare core of optical fiber, followed by an axisymmetric grating layer and an analyte. The grating consists of metal and metal oxide in an alternate manner. The proposed structure of a single channel provides two resonance modes in the transmission SPR spectra. It is found that the mode present at the lower wavelength remains fixed, and the mode present at the higher wavelength is varied when the RI of the analyte is varied, so that the previous one works as a reference mode while the latter one works as a sensing mode. These properties provide the self-referencing capability of the proposed RI sensor in ambient conditions. We have calculated the sensitivity, detection accuracy (DA) and signal to width ratio (SWR) using the SPR spectra of various probes of different combinations of plasmonic metal and metal-oxide gratings to enhance the study. The best performing probe is found to be Ag/Cu-ITO. This optimum probe attained a maximum SWR of 42, sensitivity of 5400 nm RIU−1 and DA of 0.08 nm−1 with the self-referencing capability. The optimum probe also works well for a dispersive analyte within the spectral range. The use of metal oxide provides better adsorption of the analyte as well as high sensitivity. The cumulative properties of self-referencing and the metal oxide of the designed probe make it accurate and useful for the detection of biological elements in the ambient atmosphere.

A Field-Enhancement Optical Fiber SPR Sensor Using Graphene, Molybdenum Disulfide, and Zinc Oxide

Graphene, molybdenum disulfide (MoS $$_2$$ ), and zinc oxide (ZnO) are proposed here to enhance the evanescent field of an optical fiber surface plasmon resonance (SPR) sensor. Gold and silver are the plasmonic materials, and the fiber core material is made of polymethylmethacrylate (PMMA). A Fresnel equations-based analysis is used, and the obtained results pointed out higher values of sensitivity, figure of merit, and FWHM (full-width at half maximum) when compared to conventional SPR sensors. In despite of silver-only based SPR sensor has a better performance, oxidation occurs, and the sensor’s lifetime is reduced. The addition of graphene layers leads to sensitivity values $$50\%$$ higher than the conventional sensor. On the other hand, the MoS $$_2$$ -based sensor improves the interaction of the sensor with the bio-recognition molecules, which is attractive for biomedical applications. When ZnO was added to the silver-based sensor, a highest sensitivity, 4740.9 nm/RIU, was obtained. Graphene-based silver SPR exhibit the highest FOM values.

Integrated Signal Amplification on a Fiber Optic SPR Sensor Using Duplexed Aptamers.

Throughout the past decades, fiber optic surface plasmon resonance (FO-SPR)-based biosensors have proven to be powerful tools for both the characterization of biomolecular interactions and target detection. However, as FO-SPR signals are generally related to the mass that binds to the sensor surface, multistep processes and external reagents are often required to obtain significant signals for low molecular weight targets. This increases the time, cost, and complexity of the respective bioassays and hinders continuous measurements. To overcome these requirements, in this work, cis-duplexed aptamers (DAs) were implemented on FO-SPR sensors, which underwent a conformational change upon target binding. This induced a spatial redistribution of gold nanoparticles (AuNPs) upon specific target binding and resulted in an amplified and concentration-dependent signal. Importantly, the AuNPs were covalently conjugated to the sensor, so the principle does not rely on multistep processes or external reagents. To implement this concept, first, the thickness of the gold fiber coating was adapted to match the resonance conditions of the surface plasmons present on the FO-SPR sensors with those on the AuNPs. As a result, the signal obtained due to the spatial redistribution of the AuNPs was amplified by a factor of 3 compared to the most commonly used thickness. Subsequently, the cis-DAs were successfully implemented on the FO-SPR sensors, and it was demonstrated that the DA-based FO-SPR sensors could specifically and quantitatively detect an ssDNA target with a detection limit of 230 nM. Furthermore, the redistribution of the AuNPs was proven to be reversible, which is an important prerequisite for continuous measurements. Altogether, the established DA-based FO-SPR bioassay holds much promise for the detection of low molecular weight targets in the future and opens up possibilities for FO-SPR-based continuous biosensing.

Theoretical Design of Broadband Tunable Nanograting-Coupled Fiber-Optic Surface Plasmon Resonance For Advanced Sensing

Fiber-optic surface plasmon resonance (FOSPR) technology has drawn considerable attention to the label-free biosensing field. Currently, all FOSPR sensing devices capitalizing on flat plasmonic film are only performed on the fiber sidewalls, and demonstrated in a limited wavelength range, which is unfavorable to broaden their practical sensing application. Here, we develop and theoretically demonstrate an effective alternative for the realization of SPR on a flat gold film achieved on the end facet of optical fiber through the diffracting coupling of nanograting. This enables the consecutively adjustment of operating wavelength over a broad spectral range from visible (650 nm) to near-infrared light (1550 nm) through modulating the nanograting period. The sensing performances of the proposed nanograting-coupled FOSPR sensors with different specified resonance wavelengths are numerically investigated from two aspects of bulk refractive index and surface sensitivities. As a result, the highest bulk refractive index sensitivity of 1163 nm/RIU is obtained at the operating wavelength of 1550 nm and the optimal surface sensitivity is dependent on the location away from top surface of structure. The dependence of incident polarization direction on the sensing performances of the proposed structure are also explored. Due to the ease of adjustment of operating wavelength and compact integration on the end facet, this sensing platform can further extend the utility of FOSPR sensing technology in the practical application fields of disease diagnosis, environment monitoring, etc.

Research Advances on Fiber-Optic SPR Sensors with Temperature Self-Compensation.

The fiber-optic surface plasmon resonance sensor has very promising applications in environmental monitoring, biochemical sensing, and medical diagnosis, due to the superiority of high sensitivity and novel label-free microstructure. However, the influence of ambient temperature is inevitable in practical sensing applications, and even the higher the sensitivity, the greater the influence. Therefore, how to eliminate temperature interference in the sensing process has become one of the hot issues of this research field in recent years, and some accomplishments have been achieved. This paper mainly reviews the research results on temperature self-compensating fiber-optic surface plasmon sensors. Firstly, it introduces the mechanism of a temperature self-compensating fiber-optic surface plasmon resonance sensor. Then, the latest development of temperature self-compensated sensor is reviewed from the perspective of various fiber-optic sensing structures. Finally, this paper discusses the most recent applications and development prospects of temperature self-compensated fiber-optic surface plasmon resonance sensors.

Copper-multiwalled carbon nanotubes decorated fiber-optic surface plasmon resonance sensor for detection of trace hydrogen sulfide gas

A fiber-optic surface plasmon resonance (SPR) hydrogen sulfide (H2S) gas sensor is proposed and fabricated by using silver/triaminopropyltriethoxysilane/copper-multiwalled carbon nanotubes (Ag/APTES/Cu-MWCNT) as sensing film. A single-mode fiber (SMF) is spliced between two multimode fibers (MMF) to form an MMF-SMF-MMF sensing structure. The Ag/APTES/Cu-MWCNT sensing film is coated on the surface of SMF. The performance and stability of the sensor were investigated in detail. With the increase of H2S concentration in the range of 10–100 ppm, the redshift of the resonance dip reaches 126.465 nm, and the logarithm of H2S concentration and the resonance dip wavelength shift satisfy the linear relationship. In the range of 1–10 ppm, the wavelength shifts 117.421 nm, and H2S concentration and the dip wavelength shift meet a linear relationship. The sensitivity (12.9849 nm/ppm) is obtained, the detection limit (0.146 ± 0.031 ppm) is determined, and the response time is about 28 s. The sensor has excellent selectivity, good time, humidity and temperature stability, which has potential application in the field of trace H2S gas monitoring.

Simultaneous measurement of refractive index and temperature based on a side-polish and V-groove plastic optical fiber SPR sensor.

A simple plastic optical fiber (POF) based surface plasmon resonance (SPR) sensor is proposed and demonstrated for simultaneous measurement of refractive index (RI) and temperature. The sensor consists of a series of V-grooves along the POF and a side-polish structure at the other side of the fiber. The V-groove structure can alter the SPR excitation angle and act as a mode filter, effectively enhancing the SPR effect and narrowing the SPR wavelength width. After coating a layer of thermosensitive material-polydimethylsiloxane (PDMS) film on half part of the fiber probe, a dual-parameter sensor probe is obtained for RI and temperature measurement. Experimental results show the RI sensitivity of the prepared probe can reach 1546 nm/RIU in the RI range of 1.335-1.37 RIU and the temperature sensitivity is -0.83 nm/°C in the temperature range of 20-80°C. The sensor is simple in structure and low cost, and has potential applications in the biochemical sensing fields.